Skiff Workshop Cage Bearings - Pivot: 5mm - Ceramic Bearings: 3/64" - 15 ball

These cage bearings are compatible with many Import Knives like the CJRB Pyrite, Civivi Elementum (button lock) and Knafs Lander 2. Click Compatibility tab for more info.

PLEASE NOTE: Modifying your knife may void the OEM warranty on your knife. Please check the manufacturer's warranty for the knife that you will be modifying. By purchasing these cage bearings, you acknowledge this possibility, and that LynchNW or SKiff Workshop are not liable for any damage to your folding knife that may occur during installation of these bearings.

Cage bearings that allow more balls to be placed around the knife pivot than standard cage bearings. Which provides more support for the blade and decreasing stress on each ball. The ceramic balls are captured in the disc but are still free floating to prevent binding.

Includes Grade 5 ceramic bearings pre-installed.

• 22% increased blade support over caged bearings of same size
• Improved ball pathing around pivot
• Less pivot screw tightening required
• CNC machined from solid phosphor bronze

Dimensions

Inner Diameter	Outer Diameter	Thickness	Ball
0.201"	0.335"	0.035"	0.0469"
5.08mm	8.51mm	.89mm	1.2mm

Ordering details

• One set equals two individual cage bearings

The amount of torque needed for each knife's pivot when installing these bearings  is entirely by feel. You should start off lightly and test the blade, then tighten a little more, retest the blade. Repeat that until you are happy with the action. If you are using the 8mm x 1/16" bearings then you would need less torque when tightening the pivot since there are more balls to spread the load.